User Level Factory Defaults

Certain programming options have been preset at the factory. These options can be overwritten for site-specific conditions.

CAUTION - Failure to heed the following may result in equipment damage.

• Unauthorized adjustments in the Installer Menu (beyond the LOC menu) may void heat pump's warranty.

Table 4 - Factory Defaults

CODE	DESCRIPTION	DEFAULT VALUE	RANGE
OFF	Heat Pump is deactivated.
HEA	Set to heat water to point set on thermostat.
COO	Set to cool water to point set on thermostat.
ACH	Set to maintain a water temperature set on the thermostat.
CF1	Celsius / Fahrenheit Selection	1	0 = Celsius 1 = Fahrenheit
ELC	Enter Lock Code	0	0 - 99
ULC	User Lock Code	0	0 = "User Lock Disabled" 1 = "User Lock Enabled"